products and prices

Reference	Short description
XTRACK	Complete operational system (without laptop and GPS).
XLTRACK	Same as Xtrack but Mil specs system including ruggudized laptop computer and GPS.
SOFTRACK	Software solution: Planning and navigation only (no TECI, hence no camera triggering)
Additional equipments and options
CAMKIT	Additional camera cables kit
RC8KIT	Early models RC8 triggering kit
PULSEKIT	Simple camera exposure pulse
PILOT84	8.4 inch daylight readable TFT touch screen color display
RCEDI	RC30 interface to print annotation data on film
TOPEDI	RMK TOP interface to print annotation data on film
TASOTO	Additional interface and hardware for the TAS mount and TOP camera (drift + V/H). Automatic drift setting (requires a heading source; manual input, compass, IMU, etc)
PAVOTO	PAV30 interface to control drift and read gyro angles
OTODRIFT	Drift control interface
COMPI	Interface to aircraft compass system (requires additional avionics hardware)
MEP	Special mid exposure pulse generator for older cameras
PCSUP	24 Volts power supply adaptor for laptop computers
xTRACK	Additional cross track indicator (DISCONTINUED!)
EASYGO	World wide installation and training

Products Reference	Description and equipment included
EZTRACK	Complete system for planning, navigation, camera control and indexing. snapLIM: Digitizing tablet software. snapXYZ: Coordinates input software. snapPLAN: Automated aerial photography planning software. snapSHOT: Aerial survey navigation and camera control software. snapBASE: Database and project management software. snapPLOT: Automated photo index software. TECI-3 (Track'air External Camera Interface) camera control box with cables and integrated 12 channels GPS. 4 lines LCD cross track indicator for pilot. Exposure pulse generator for RMK-A, RC8, RC10. Sends a pulse back when the camera is firing. 8.4 inch multisync high brightness daylight readable TFT color display coming either with articulated arm and clamping system or with yoke mount (standard). Remarks: Plug and play installation for RC10, RC20, RC30, RMK-A and RMK TOP. Installation possible on all RC8 models (send serial number). EZtrack is compatible with all the options described below. EZtrack requires a standard laptop PC which is not included in the delivery. Laptops must be locally purchased by the customers.
CAMKIT	EZtrack is delivered configured for ONE camera type. To use the system with other camera type, order a CAMKIT additional camera cables kit (RC10/20/30, RMKA all types, LMK 1000/2000, TOP, etc).
RC8KIT	Special triggering kit for early RC8 camera (s/n < 400). Only required if the EZtrack package was originally delivered in an other camera configuration.
PULSEKIT	Additional pulse generator for the determination of the camera exposure time and position (EZtrack includes ONE PULSEKIT).
PILOT84	8.4 inch multisync high brightness daylight readable TFT color display coming either with articulated arm and clamping system or with yoke mount (standard). Includes 12 to 24 Volts power supply.

RCEDI	Special interface to print flight data to the film margins of the RC30. Can also send V/H to the optional RC30 extended EDI (see LH Dealer).
TOPEDI	Special interface to print flight data to the film margins of the Zeiss TOP. Note: Requires the RMK TOP external serial interface option (see Zeiss dealer).
PAVOTO	PAV30 automatic control interface. Automatic freeze/ unfreeze, drift setting via software, recording of gyro angular positions, etc. Note: Requires the PAV30 communication option (see LH Dealer).
OTODRIFT	Special interface to control via software the drift setting of the Zeiss RMK AS2 mount and WILD RC10 mount (other mounts also possible). Note: These items are built on order.
COMPI	Digital compass interface to connect to the aircraft compass. The aircraft compass must be fitted with a synchro/ RS232 converter (see Shadin dealers). Can be connected to the aircraft compass via an additional interface.
MEP	Mid exposure pulse generator for RMKA, RC8, RC9 and RC10 or any other camera. Only required for precise DGPS camera position determination (EZtrack is delivered with a simple pulse system for normal aerial work).

PCSUP	24 Volts airplane power supply for PC laptop. Remark: The laptop power supply should be installed by a qualified avionics engineer (PCSUP is not aviation approved).
XTRACK	Additional pilot LCD cross track indicator
TRACKER	Complete planning software system, including: snapLIM: Digitizing tablet utility. snapXYZ: Coordinates input utility. snapPLAN: Automated aerial photography planning. snapSHOT: Aerial survey navigation and camera control (for simulation only). snapBASE: Database and project management. snapPLOT: Automated photo index. The above modules are NOT available separately. Note: A complete evaluation copy of the TRACKER can be downloaded here.
XLTRACK	Same as the EZtrack package but all hardware delivered in military specifications. The system also includes a mil specs laptop computer and a GPS receiver. The package includes 3 years hardware guarantee and on site installation and crew training
READYGO	Installation world wide with 3 days crew training on site.

EZtrack is delivered ready to work. The options which are available to enhance the system are not initially required and can be purchased and added to the system at any time. Example of possible configurations follows:

Camera	Required	Existing options
RMKA, RC8/9	EZtrack
		MEP Mid Exposure Pulse
		PCSUP laptop power supply
		PILOT84 multisync display


RC10	EZtrack
		MEP Mid Exposure Pulse
		PILOT84 multisync display
		PCSUP laptop power supply
		RC1D LCD display


RC20	EZtrack
		PCSUP laptop power supply
		PILOT84 multisync display


LMK 1000	EZtrack
		PILOT84 multisync display
		PCSUP laptop power supply
		LMK1D LCD display


RC30 RMK TOP	EZtrack
		RCEDI margins data
		PCSUP laptop power supply
		PILOT84 multisync display


AUTO DRIFT SETTING	PAVOTO or OTODRIFT camera mount drift control interface
	COMPI digital compass interface