Download manuals for the TRACKER equipment and software below.

Please note that the manuals below might not exactly match the hard- and software you are using. As the system is being changed and improved all the time, the written material can become slightly different from the current software release. Manuals are updated as often as possible to reflect changes made to the hard- and software. If there are items not explained in the manuals available below, please contact us directly via e-mail or telephone for more information.

 
Software-related manuals:
TRACKER manual
- global information folder about the TRACKER system hard- and software, in PDF format.
snapBASE manual
- The snapBASE module is a management tool that is used to check and keep track of the status and snapBASE progress of an aerial photography project, in PDF format.
snapPLAN manual
- The snapPLAN module carries out all planning in the manner a navigator would manually create his snapPLAN flight plan on a map, in PDF format.
snapLIM manual
- The snapLIM module is a digitizing utility specially designed for aerial survey planning with the TRACKER system, in PDF format.
snapPLOT manual
- The snapPLOT module is a click and point utility for the rapid preparation of standard aerial survey documents, in PDF format.
snapXYZ manual
- The snapXYZ module is a digitizing utility used when a list of the coordinates of the areas or photo lines already exists or is easy to prepare, in PDF format.
snapSHOT manual
- The snapSHOT module is a complete airborne support system for aerial survey. It consists of software running on a portable PC and an external electronic interface connecting the GPS, camera and the PC, in PDF format. 
 
Hardware-related manuals:
general hardware manual
- The TRACKER hardware is explained in detail in this manual. A lot of details not explained in this manual can be found below. Document in PDF format.
general hardware specifications
- Size & power-consumption details of the TRACKER hardware, the TECI-3 camera/GPS interface system and the PILOT84 LVDS display system, in PDF format.
TECI-3 specifications
- Manual explaining all connections of the TECI-3 camera/GPS interface system. These details are also available in the general hardware manual, in PDF format.
TECI-3 internal GPS receiver Garmin 15 manual
- Manual explaining details of the internal GPS receiver Garmin 15, used inside the TECI-3 system since 2005, in PDF format.
TECI-3 internal GPS receiver Garmin 25 manual
- Manual explaining details of the internal GPS receiver Garmin 25, used inside the TECI-3 system before 2005, in PDF format.
TECI-3 specifications
- Manual explaining all connections of the TECI-3 camera/GPS interface system. These details are also available in the general hardware manual, in PDF format.
PILOT84 with USB-touchscreen  manual
- The manual of the most recent 8.4 Inch LVDS pilot display system. This manual explains all the connections, setup and usage of the pilot display. Document in PDF format.
PILOT84 (older type) without touchscreen manual
- The manual of the older type 8.4 Inch LVDS pilot display system. This manual explains all the connections, setup and usage of the older type pilot display. (Note: your display could differ from these manuals, if this is the case and you need information, please contact us via e-mail or telephone.) Document in PDF format.
Mid Exposure Pulse Generator (MEP) manual
- The manual of Track'Air Mid Exposure Pulse generator. Document in PDF format.

to top of page

© 2008 Track'Air B.V.